Hinged Door Measurement Worksheet

Use this worksheet to send us the measurements and photos for your opening. Fill in what you can. If anything is unclear, call 813-709-5122 or email jody@patinayard.com and we will walk you through it.

PATINA YARDCUSTOM DOOR WORKSHEET

Hinged door measurements

Record the finished opening first. Then select your hinge and swing arrangement. Don't have every measurement yet? Fill in what you can and we'll help with the rest.

A · Project at a glance

B · Finished opening dimensions

Use a tape measure. Measure the clear opening between the finished jambs or trim, not the outside trim edges. Enter every reading; do not average. All measurements in inches.
W1W2W3H1H2H3VIEW OF FINISHED OPENING
Width: W1 across top, W2 across center, W3 across bottom.
Height: H1 left side, H2 center, H3 right side.

C · Floor & site conditions

Measure heights from the final floor level. Door size and clearances are confirmed during review.
Floor

D · Select your swing - plan view

Stand outside the room and look in. INTERIOR is above each opening; you are on the EXTERIOR side below it. Bronze dot = hinge. Curved arrow = opening direction. Dashed line = closed position.
SINGLE DOOR
S1 Hinges LEFT / IN
INTERIOREXTERIOR / YOUR VIEW
S2 Hinges RIGHT / IN
INTERIOREXTERIOR / YOUR VIEW
S3 Hinges LEFT / OUT
INTERIOREXTERIOR / YOUR VIEW
S4 Hinges RIGHT / OUT
INTERIOREXTERIOR / YOUR VIEW
DOUBLE DOORS
D1 Active leaf LEFT / IN
INTERIOREXTERIOR / YOUR VIEW
D2 Active leaf RIGHT / IN
INTERIOREXTERIOR / YOUR VIEW
D3 Active leaf LEFT / OUT
INTERIOREXTERIOR / YOUR VIEW
D4 Active leaf RIGHT / OUT
INTERIOREXTERIOR / YOUR VIEW
IN = opens into the room, away from you. OUT = opens toward you. For pairs, the active leaf is the door used first; both leaves are shown open.
Swing arrangement

E · Photos & site notes

Share photos of the full opening, both sides of the wall, and the floor / trim.
Drag & Drop Files, Choose Files to Upload You can upload up to 5 files.
Up to 5 photos, sketches or a PDF (10 MB each).
All measurements in inches. Planning only. Patina Yard confirms final handing, active leaf and hardware before fabrication.
=